• LinkIn

RS-232 Isolated Repeater/Isolator - ULI-232 Series


ULI-232 series RS-232 isolators and repeaters are UL C1/D2 listed and feature 2.0 kV isolation protection and wide operating temperature range.

  • BB-232LB9R

    BB-232LB9R


    BB-232LB9R retransmits 8 signals and carries ground line through. Computers with low-power RS232 ports cannot drive port-powered devices or full-length RS-232 cabling. BB-232LB9R amplifies weak signals to the RS232 Standard. Use for extending full-power RS-232 cable runs beyond 15-30m distance.


  • BB-232OPDR

    BB-232OPDR


    BB-232OPDR isolator and repeater provides 2kV isolation for 4 RS232 lines (2 in each direction). Supports 2 data pairs or 1 data pair plus control signals in both directions. As a repeater it extends RS232 another 15.2 m. 4 data and 1 power LED. Terminal block connections. Power supply not included.


  • BB-232OPDRI

    BB-232OPDRI


    BB-232OPDRI premium industrial RS-232 repeater with 2kV optical isolation on both data ports protects equipment and data from ground loops and surges, plus isolation on power supply circuits for a third degree of protection. Data connected via DB9F/DCE and DB9M/DTE. TB power.


  • BB-232OPDRI-PH

    BB-232OPDRI-PH


    The BB-232OPDRI-PH is a premium heavy industrial RS-232 isolated repeater. Designed for rugged industrial environments, it meets some of the most exacting compliance tests in the industry including IEC 61850-3 and IEEE 1613 making it suitable for installation in electrical substations. These specifications are more stringent than the NEMA TS1/TS2 requirements for transportation applications. Powerful isolation on both data ports protects your equipment and data from damaging ground loops and surges. Additional isolation on the power supply circuits adds a third degree of protection. Packaged in a rugged IP30 metal case, this repeater operates in wide temperature extremes. The panel mount form factor with DIN Rail mount option makes it easy to integrate into your control panel or other industrial equipment. Installation and configuration is easy. Data is connected with a DB9 female connector (DCE) and a DB9 male connector (DTE). Power is connected through terminal block that ac...


  • BB-232SPHI4

    BB-232SPHI4


    Model 232SPHI4 isolates and protects RS-232 equipment from lightning surges, accidental high voltage shorts and ground loops. The isolator supports RS-232 data signals up to 115.2 kbps as well as RTS and CTS handshake lines. Model 232SPHI4 provides 4000 Volts isolation between sides — twice the rating of most isolators. DTE device connections are made through a DB-25 female. DCE device connections are made through a DB-25 male. The two sides of the isolator are powered independently to maintain isolation. Both sides can draw power from the RS-232 data and handshake lines, eliminating external powering requirements in nearly all systems. If the isolator is to be used with low power ports or when no handshake lines are available, external power can be supplied to either side or both (power supply not included, sold separately). This versatile powering configuration minimizes the number of supplies required by the overall system.


  • BB-9POP4

    BB-9POP4


    Model 9POP4 isolates and protects RS-232 equipment from lightning surges, accidental high voltage shorts, and ground loops. RS-232 data signals TD, RD, RTS, and CTS are supported at up to 230.4 kbps. Isolation circuits are 2.5 kV rated and protects valuable equipment while maintaining maximum uptime. Each side of the isolator receives power from a single 12 VDC power supply to maintain the isolation. This powering configuration allows the device to be used in a system with only one power supply, regardless of the power provided by the RS-232 ports. The isolator uses DB9 male and DB9 female connectors. The female connector is wired as a DCE and should be connected to a DTE port. The male connector is a DTE and should be connected to a DCE port. If you are connecting a DTE to a DTE or a DCE to a DCE, you will need a null modem adapter. Recommended, tested and certified power supply is available from Advantech B B SmartWorx. (Note: using any other power supply may bypass or degrade th...


  • BB-9SPOP2

    BB-9SPOP2


    Model 9SPOP2 is a port-powered, two-channel isolator with a 2,500 Volts protection level. It optically isolates both the RS-232 Transmit Data and Receive Data lines and RS-232 equipment from lightning surges, accidental high voltage shorts, and ground loops. RS-232 data signals TD and RD are supported at up to 115.2 kbps.


Get Quote
© Copyright 2024 Advantech All rights reserved. Privacy Policy